SPOJE.NET

Tato stránka je pouze pro čtení. Můžete si pouze prohlédnout zdrojový kód, ale ne ho měnit. Zeptejte se správce, pokud si myslíte, že něco není v pořádku.
====== Switche Brocade ======
===== FastIron FCX648S(-HPOE) =====
==== Bypass hesla ====
behem bootu vypise tohle:
   FCX Boot Code Version 7.0.01 (grz07001)
   Enter 'a' to stop at memory test
   Enter 'b' to stop at boot monitor
zmacknout [B] (aktivuje "boot monitor"). tam spustit prikazy:
   no password 
   boot system flash primary 
==== Deaktivace stackovani ====
Pokud se stane, ze ani po bypassnuti hesla a enable nejde nic nastavovat (napr. zadat "configure terminal"), muze to bejt tim, ze je switch ve slave modu do stacku. To se vyresi tohle.
   enable
   stack unconfigure me
==== Reset nastaveni ====
   enable
   erase startup-config
==== Nastaveni hesla ====
    enable
    configure terminal
    enable super-user-password <text>
dalsi enable hesla:
    enable port-config-password <text>
    enable read-only-password <text>
==== Nastaveni IP adresy ====
   enable
   configure terminal
   ip address 10.11.57.66 255.255.255.128
   ip default-gateway 10.11.57.1
==== Vygenerovat klice a nastavit ssh ====
   configure terminal
   crypto key generate
3) set an idle timeout
   ip ssh idle-time 20  !time in minutes
4) set a login timeout
   ip ssh timeout 60  !time in seconds
5) consider disabling telnet (optional)
   no telnet server
6) Now create the local login accounts:
   user icxadmin privilege 0 pass <yourSuperSecurePassword>
7) Configure AAA to use the local user database as default
   aaa authentication login default local
8) Consider enabling user/pass requirement for console access too (optional)
   enable aaa console
==== Povolit prihlasovani lokalnich useru ====
povolit prebirani loginu ze seznamu user ("local") jinak se pouziva jen superuser heslo ("enable")
   enable
   configure terminal
   aaa authentication login default local
   aaa authentication web-server default local
povolit zmeny hesel pres vsechny interfacy (jinak to nejde treba pres web)
   password-change any
==== Zalozit lokalniho usera ====
   enable
   configure terminal
   username USERNAME password HESLO
==== Ulozit konfiguraci ====
   write memory
==== Dump konfigurace ====
   write terminal
==== LACP ====
<code>
lag-hash exclude-l2mac
!
lag <jmeno> dynamic id 1                                         
 ports ethernet 1/1/43 to 1/1/46                                  
 primary-port 1/1/43                                              
 lacp-timeout long              
</code>
~ na linuxu: 802.3ad, balancing per IP adresa (default je MAC)
''%%bonding mode=4 miimon=100 lacp_rate=1 xmit_hash_policy=1%%''


===== Odkazy =====

  * {{:howto:network:fastiron-08030-adminguide.pdf|Admin guide}}
  * {{:howto:network:fastiron-08030-securityguide.pdf|Security guide}}
  * {{:howto:network:fastiron_08030_webguide.pdf|Web guide}}
  * {{:howto:network:fastiron-08030b-l3guide.pdf|L3 guide}}
  * {{:howto:network:fastiron-08030-ipmulticastguide.pdf|Multicast guide}}
  * {{:howto:network:fastiron-08030d-l2guide.pdf|L2 guide}}
  * {{:howto:network:fastiron-08030d-upgradeguide.pdf|Upgrade guide}}
  * {{:howto:network:fastiron-08030-trafficmanagementguide.pdf|Traffic management guide}}
  * {{:howto:network:brocade_overview_user-manual-35543_manymanuals.com_.pdf|Install guide }}